NYÍREGYHÁZI FŐISKOLA
MŰSZAKI ÉS AGRÁRTUDOMÁNYI INTÉZET
Műszaki Alapozó, Fizika és Gépgyártástechnológia
Intézeti Tanszék
Dr. Dudás Illés
PUBLIKÁCIÓK, ÉRTEKEZÉSEK JEGYZÉKE
1. Könyv, könyvrészlet
a./ Idegen nyelvű
1. Theory and Practice of Worm Drives, Penton Press, London, 2000. p. 315.
2. Short history of the department, educational and research activity, Miskolc, 2000, p. 20., ISSN 1217-5927
3. The International Conference on Tools, ICT-2000, „In the year of the MILLENIUM”, Procedings Edited by Illés Dudás
2000. szeptember 6-8., pp.: XI-XII., ISBN 963 661 434 2, p.: 470.
4. Developing Tendencies of Production Engineering, Production Processes and Systems, Volume 1 (2002), Miskolc, 2002, HU ISSN 1215-0851
b./ Magyar nyelvű
1. Gépgyártástechnológia I. A gépgyártástechnológia alapjai Egyetemi tankönyv. Miskolci Egyetemi Kiadó, 2000. p. 583. ISBN 963 661 342 7
2. Gépgyártástechnológia II. Forgácsoláselmélet, technológiai tervezés alapjai Egyetemi tankönyv. Miskolci Egyetemi Kiadó, 2001. p. 319. ISBN 963 661 431 8 Ö; ISBN 963 661 478 4
3. Gépgyártástechnológia III. A. Megmunkáló eljárások és szerszámaik; B. Fogazott alkatrészek gyártása és szerszámaik Egyetemi tankönyv. Miskolci Egyetemi Kiadó, 2003. p. 539. ISBN 963 661 572 1
4. Gépgyártástechnológia IV., Egyetemi tankönyv. Miskolci Egyetemi Kiadó, 2004., p.337. (Társszerző: Cser István), ISBN 963 661 629 9
5. Emlékfüzet Bálint Lajos egyetemi tanárról és Fridrik László egyetemi docensről a Gépgyártástechnológiai Tanszék egyköri vezetőiről. A Gépgyártástechnológiai Tanszék rövid története. Miskolc, 1996, p. 41. ISSN 1217-5927, ISBN 963 661 2846
6. Emlékfüzet Bálint Lajos professzorról, Miskolc, 1998. augusztus 27-28., p. 114., ISSN 1217-5927
7. A Tanszék rövid története, oktatási és kutatási tevékenysége, Miskolc, 1999. augusztus 24., p. 22., ISSN 1217-5927-8
8. 50 éves a Miskolci Egyetem Gépgyártástechnológiai Tanszéke, Production Processes and Systems – A Publication of the University of Miskolc, Volume 2 (2002), Miskolc, 2002, HU ISSN 1215-0851 p.:160.
9. A forgácsolás technológiájának fejlesztési irányai, pp.: 89-110., Szerkesztő: Dr. Prohászka János, (Társszerzők: Dr. Bakondi Károly, Dr. Szabó András, Dr. Kodácsy János), A technológia helyzete és jövője című kiadvány, Magyar Tudományos Akadémia Társadalomkutató Központ, Budapest, 2001., p.: 214., ISBN 963 508 270 3
2. Cikk
a./ Idegen nyelvű
1. Electrical metrology of dynamic features of machine tools, Institution of Mechanical Buyeneers, Oxford, United Kingdom, 30-31 March, 2000, pp.: 137-140. (Társszerző: Dr. Csermely Tibor)
2. Twist Drill Vibration at Environmentally Conscious Manufacturing Proceedings of the 3rd International Conference on Quality, Reliability, and Maintenance Oxford, United Kingdom, 30-31 March, 2000, pp.: 383-386. (Társszerzők: Dr. Varga Gyula, Dr. Csermely Tibor) ISBN I 86 058 2567
3. Die wesentlichen gemeinsamen wissenschaftlichen Ergebnisse des Institutes für Fertigungstechnik und Qualitätssicherung und des Lehrstuhles für Maschinenbautechnik Die 40-jährige Zusammenarbeit der Universitätaten Miskolc und Magdeburg 28. 02. 2001, University of Miskolc, Miskolc, Hungary
4. Tendencies in the Development of Production Engineering, European Integration Studies, 2002, ISSN 1588-6735
5. The history, educational and research activity of the 50 year-old Department of Production Engineering of University of Miskolc, Publ. Univ. of Miskolc, Production Processes and Systems, Vol 1, Miskolc University Press, 2002, pp. 15 – 44, HU ISSN 1215-0851
6. Analysis of the Spiroid Drivings Having New Production Geometry, Publ. Univ. of Miskolc, Production Processes and Systems, Vol 1, Miskolc University Press, 2002, pp. 177 – 184, HU ISSN 1215-0851
7. 3D Surface Topography of Surfaces Machined by Environmentally Conscious Way, Publ. Univ. of Miskolc, Production Processes and Systems, Vol 1, Miskolc University Press, 2002, pp. 185 – 194, HU ISSN 1215-0851 (Társszerzők: Varga Gy., K. J. Stout)
8. A Development of the New Method for Describing the Bearing Pattern of the Spiroid Driving. Publ. Univ. of Miskolc, Production Processes and Systems, Vol 4, Miskolc University Press 2004. pp.13-23.HU ISSN 1215-0851 (Társszerző: Balajti Zsuzsa)
9. Investigation of Connection of Modificated Spiroid Drive Pairs. Univ. of Miskolc, Production Processes and Systems, Vol 4, Miskolc University Press 2004. pp.25-34. HU ISSN 1215-0851 (Társszerző: Bányai Károly)
10. Investigation of Worm Gear Drive by Simulation. Publ. Univ. of Miskolc, Production Processes and Systems, Vol 4, Miskolc University Press 2004. pp.35-42..HU ISSN 1215-0851
11. Application of Geometrical Models at Rapid Prototyping Processes. Publ. Univ. of Miskolc, Production Processes and Systems, Vol 4, Miskolc University Press 2004. pp.43-53..HU ISSN 1215-0851
12. Examination of Enviromentally Clean Machinings. Publ. Univ. of Miskolc, Production Processes and Systems, Vol 4, Miskolc University Press 2004. pp.55-71..HU ISSN 1215-0851 (Társszerző: Varga Gyula)
13. Planning of Tool-Flow Nowadays, Gép, 2000 LI.évf. 9. sz. pp.: 26-29 (Társszerzők: Dr. Szabó Sándor, Dr. Varga Gyula)
14. The Possibility of the Use of CCD Camera for Manufacturing of Precision Surfaces, Gép, 2000 LI. évf. 9. sz. pp.: 37-40. (Társzerző: Dr. Varga Gyula)
15. Intelligent Manufacturing System for Production of Helicoid Surfaces, Gép, 2000 LI. évf. 9. sz. pp.: 44-46 (Társszerző: Dr. Varga Gyula)
b./ Magyar nyelvű
1. Geometriai modellek alkalmazása a „Gyors-prototípus” eljárásoknál, Gyors prototípus gyártás a Miskolci Egyetemen, Gépgyártás XLIV. évfolyam, 2004. 2-3. szám, pp.:9-19., HU ISSN 0016-8580
3. Konferencia kiadvány
a./ Idegen nyelvű
1. The Use of Electrical Metrology for Analysis of Features of Machine Tools, microCAD’2000 Nemzetközi Számítástechnikai Tudományos Konferencia, Miskolc, 2000. február 23-24., (Társszerző: Dr. Csermely Tibor)
2. The Use of CCD Cameras in Metrology, microCAD’2000 Nemzetközi Számítástechnikai Tudományos Konferencia, Miskolc, 2000. február 23-24., (Társszerző: Dr. Varga Gyula)
3. Intelligent Manufacturing System for Productions of Sophisticated, microCAD’2000 Nemzetközi Számítástechnikai Tudományos Konferencia, Miskolc, 2000. február 23-24., (Társszerző: Dr. Varga Gyula)
4. Application of Grinding Wheels Having One Lazer Grain for Production of Helicoid Surfaces, microCAD’2000 Nemzetközi Számítástechnikai Tudományos Konferencia, Miskolc, 2000. február 23-24., (Társszerző: Molnár Gábor)
5. The Use of CCD Cameras in Production Engineering, microCAD’2000 Nemzetközi Számítástechnikai Tudományos Konferencia, Miskolc, 2000. február 23-24., (Társszerző: Sztermenné Németh Hilda)
6. Examinations of Sliding Burnishing for Finishing Operation of External Cylindrical Surfaces, Huddersfield, (Társszerző: Dr. Varga Gyula, Dr. Leskó Balázs)
7. Electrical metrology of dynamic features of machine tools, Proceedings of the 3rd International Conference on Quality, Reliability, and Maintenance, Oxford, United Kingdom, 30-31 March, 2000, pp.: 137-140., (Társszerző: Dr. Csermely Tibor)
8. Twist Drill Vibration at Environmentally Conscious Manufacturing, Proceedings of the 3rd International Conference on Quality, Reliability, and Maintenance, Oxford, United Kingdom, 30-31 March, 2000, pp.: 383-386., (Társszerzők: Dr. Varga Gyula, Dr. Csermely Tibor)
9. The use of CCD cameras in production engineering of sophisticated engineering surfaces, The 28th Israel Conference on Mechanical Engineering, Ben-Gurion University of the Negev Beer-Sheva, Israel, 14-15 June, 2000., (Társszerző: Dr. Varga Gyula)
10. Analysis of environmentally conscious manufacturing technologies, The 28th Israel Conference on Mechanical Engineering, Ben-Gurion University of the Negev Beer-Sheva, Israel, 14-15 June, 2000., (Társszerző: Dr. Varga Gyula)
11. Intelligent Automation of Design and Manufacture of Worm Gear Drives, Proceeding of the Tenth International Conference on Tools, Miskolc, Hungary, 6-8 September, 2000. pp.: 37-43.
12. Examination of the Efficiency of a Worm Drive by Dimensional Analysis, Proceeding of the Tenth International Conference on Tools, Miskolc, Hungary, 6-8 September, 2000. pp.: 45-51.,, (Társszerzők: Dr. Szirtes Tamás, Dr. Bányai Károly)
13. Examination Dynamic Features of Machine Tools in These Days, Proceeding of the Tenth International Conference on Tools, Miskolc, Hungary, 6-8 September, 2000. pp.: 53-58., (Társszerző: Dr. Csermely Tibor)
14. Werkzeuge und Werkzeugsmaschinen QM-Systeme von Maschienenbau-technologie, Proceeding of the Tenth International Conference on Tools, Miskolc, Hungary, 6-8 September, 2000. pp.: 59-63., (Társszerző. Dr. Csermely Tibor)
15. Intelligent Manufacturing System for Production of Helicoid Surfaces, Proceeding of the Tenth International Conference on Tools, Miskolc, Hungary, 6-8 September, 2000. pp.: 127-132., (Társszerző: Dr. Varga Gyula)
16. Planning of Tool-Flow Nowadays, Proceeding of the Tenth International Conference on Tools, Miskolc, Hungary, 6-8 September, 2000. pp.: 159-165., (Társszerzők: Dr. Szabó Sándor, Dr. Varga Gyula)
17. The Possibility of the Use of CCD Camera for Manufacturing of Precision Surfaces, Proceeding of the Tenth International Conference on Tools, Miskolc, Hungary, 6-8 September, 2000. pp.: 291-296., (Társszerző: Dr. Varga Gyula)
18. Anwendungsgebieter Umweltfreundlicher Technologien In Der Maschinenbau-industrie,Proceeding of the Tenth International Conference on Tools, Miskolc, Hungary, 6-8 September, 2000. pp.: 325-331.
19. Die wesentlichen gemeinsamen wissenschaftlichen Ergebnisse des Institutes für Fertigungstechnik und Qualitätssicherung und des Lehrstuhles für Maschinenbautechnik, Die 40-jährige Zusammenarbeit der Universitätaten Miskolc und Magdeburg, 28. 02. 2001, Universit of Miskolc, Miskolc, Hungary
20. Production of Transmission driving pairs in CIM-Systems, MicroCAD 2001 International Scientific Conference, 1-2 March 2001, Univeristy of Miskolc, Miskolc, Hungary
21. The Application of Computers to the Analysis of Surfaces Produced in Production Processes, MicroCAD 2001 International Scientific Conference, 1-2 March 2001, Univeristy of Miskolc, Miskolc, Hungary, (Társszerző: Prof. Dr. K. J. Stout)
22. Environmentally Friendly Lubrication, MicroCAD 2001 International Scientific Conference, 1-2 March 2001, Univeristy of Miskolc, Miskolc, Hungary, (Társszerző: Dr. Varga Gyula)
23. Overview of the Literature of Production Systems, MicroCAD 2001 International Scientific Conference, 1-2 March 2001, Univeristy of Miskolc, Miskolc, Hungary, (Társszerző: Dr. Varga Gyula)
24. Metrological Use ofCCD Cameras, MicroCAD 2001 International Scientific Conference, 1-2 March 2001, Univeristy of Miskolc, Miskolc, Hungary, (Társszerző: Dr. Varga Gyula)
25. The Role of the Development of Product and Production in the Quality Assurance, MicroCAD 2001 International Scientific Conference, 1-2 March 2001, Univeristy of Miskolc, Miskolc, Hungary, (Társszerző: Dr. Csermely Tibor)
26. Optimization of generation of helicoidal surfaces, The International Conference on Mechanical Transmissions (ICMT’2001), April 5-10, 2001, Chongqing University, Chongqing, P.R. China, (Társsszerző: Dr. Károly Bányai)
27. Planning of Optimum Mating and Grinding of Helicoid Surfaces, International Multidisciplinary Conference, May 25-26, 2001., Baia Mare, pp.: 60-65., (Társszerző: Dr. Bányai Károly)
28. Measurement of tool profiles by CCD cameras, 5th ISMTII – International Symposium on Measurement Technology and Intelligent Instruments, Sept. 25-29, 2001. Giza – Cairo, Egypt, pp.: 91-96.
29. Grinding wheel profile measurmeent by CCD camera, Annals of DAAM for 2001 & Proceedings of the 12th International DAAAM Symposium, 24-27th October 2001, Jena, Germany, pp.: 117-118., (Társszerzők: Dr. Varga Gyula, Dr. Bányai Károly)
30. Production of helicoid surfaces in intelligent systems, Annals of MteM for 2001 & Proceedings of the 5th International MteM Symposium, 4-6th October 2001, Cluj-Napoca, Románia, pp.:177-182.
31. Up to date method for the determination of the grinding wheels profile, MicroCAD 2002 International Scientific Conference, 7-8 March 2002, Univeristy of Miskolc, Miskolc, Hungary, (Társszerző: Dr. Bányai Károly, dr. Balajti Zsuzsa)
32. 3D Analysis of Surfaces Machined by Environmentally Conscious Way, Anals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium, Wienna, Austria, 23 – 26th October, 2002, pp.: 585 – 586. (Társszerzők: Dr. Varga Gyula, Dr. Ken J. Stout)
33. New Production Geometry of Modified Spiroid Drives, Anals of DAAAM for 2002 & Proceedings of the 13th International DAAAM Symposium, Wienna, Austria, 23 – 26th October, 2002, pp.: 145 – 146. (Társszerző: Dr. Bányai Károly)
34. Analysis of LOM type Rapid-Prototype System, Polnisch-Ungarisches Seminar, 2002, Technische Universität in Gdansk, 15. december 2002 p.7 (megjelenés alatt) (Társszerző: Cs. Gyenge)
35. Analysis of lom type rapid-prototype system, Materialy VI Miedzynarodowego Seminarium Proceedings of the 6th Internetional Seminar, Technologia Obróbki Wykanczajacej Finidhing Machining, Gdansk, 16.12.2002. (Társszerző: Gyenge Csaba)
36. Production Geometry and Manufacturing of Helicoids, II. Sympozjum – Wybrane problemy Projektrowania Procesów Technologicznycs, Sopot 18-19 maja 2004, pp.:49-60.ISBN 83-88579-85-1
37. The use of holonic manufacturing system for production of worm driving pairs, Research and Education, For the 40 years jubilee of the cooperation between the National Technical University „Kharkiv Politechnic Institute” and the University of Miskolc, Harkiov, 2004., pp. 99-106. (Társszerzők: Gyula Varga, Károly Bányai) ISBN 966-593-337-X
38. Unyifikácija operátorov i elementov otobrazsényija prosztranszva pri 3 D modelliroványija rézsusih insztrumentov, Research and Education, For the 40 years jubilee of the cooperation between the National Technical University „Kharkiv Politechnic Institute” and the University of Miskolc, Harkiov, 2004., pp.169-174. ISBN 966-593-337-X
39. A New Description Method for the Bearing Pattern of the Spiroid Driving. 11th Intenational Conference on Tools ICT-2004 September 9-11. 2004, Miskolc, Hungary (Társszerzők: Balajti Zs., Bányai K.)
40. Production Geometry of Modified Spiroid Drives. 11th Intenational Conference on Tools ICT-2004 September 9-11. 2004, Miskolc, Hungary (Társszerzők: Bányai K.)
41. Application of Geometrical Models at Rapid Prototyping Process (Geometriai modellek alkalmazása az RP-nél) 11th Intenational Conference on Tools ICT-2004 September 9-11. 2004, Miskolc, Hungary
42. Investigation of Worm Gear Drive by Simulation (Csigahajtások szimulációs elemzése) 11th Intenational Conference on Tools ICT-2004 September 9-11. 2004, Miskolc, Hungary
43. Enviromentally Clean Machining 11th Intenational Conference on Tools ICT-2004 September 9-11. 2004, Miskolc, Hungary (Társszerzők: Varga Gyula)
44. Experimental Examination of Propagation of Longitudinal Deformation of Different Shapes of Horn Used at Ultrasonic Machining. 11th Intenational Conference on Tools ICT-2004 September 9-11. 2004, Miskolc, Hungary (Társszerzők: Kyusojin A., Varga Gy., Isobe H., Oravecz Cs.)
45. Investigation of Connection of Modificated Spiroid Drive Pairs. Publ. Univ. of Miskolc, Production Processes and Systems, Vol 4, Miskolc University Press 2004. pp.25-34.HU ISSN 1215-0851(Társszerző: Bányai Károly)
46. Holonic Manufacturing System for Production of Different Sophisticated Surfaces. Proceedings of the Fourth IASTED International Conference on Modelling, Simulation, and Optimization, held August 17-19, 2004. Kauai, Hawaii, USA, pp.:72-75. ISBN: 0-88986-424-1, ISSN: 1021-8181., (Társszerzők: Gyula Varga, Károly Bányai)
47. Modelling and Examinations of dry Machining Processes. Proceedings of the Fourth IASTED International Conference on Modelling, Simulation, and Optimization, held August 17-19, 2004. Kauai, Hawaii, USA, pp.:327-331. ISBN: 0-88986-424-1, ISSN: 1021-8181., (Társszerző: Gyula Varga)
48. 3D Topography for Enviromentally Friendly Machined Surfaces, 7th International Symposium Series on Measurement Technology & Intelligent Instruments 6-8 September 2005. Huddersfield, UK; ISMTII 2005.pp.:103-106. (Társszerző: Varga Gyula)
49. Advantages of the CCD Camera Measurements for Profile and Wear of Cutting Tools. 7th International Symposium Series on Measurement Technology & Intelligent Instruments 6-8 September 2005. Huddersfield, UK; ISMTII 2005.pp.:271-274. (Társszerző: Balajti Zsuzsa, Varga Gyula)
50. A Kolozsvári Műszaki Egyetem vendégprofesszori előadásai német, angol és magyar nyelven:
· Experimentelle Untersuchung des Bohrprozesses
· Allgemeine Tendenzen der Entwicklung der Produktionstechnik
· Manufacturing and Qualification of Drives With Good Efficiency and High Load Capacity
· Hoch- und Spitzentechnologien der Fertigungstechnik – Entwicklungsstand und – Perspektiven
· Zur Enstehung von Verzagnungsabweichungen Spanend Bearbeiteter Zylinderräder
· Verfahren zur Weichbearbeitung von Zahnrädern
· Herstellung von Schraubenflächen im Automatischem System
51. Trends in Production Engineering, Dr. h.c. előadás, Kolozsvár, 2002 November 21.
52. Rapid Prototyping at the University of Miskolc. University of Exeter Innovation Center. 26. január. 2005.(UK) (Társszerzők: Dudás Nóra, Varga Gyula, Felhő Csaba)
53. Production Engineering int he 21th century, Anmals of MTeM for 2005 & Proceedings of the 7th International MTeM Conference Modern Technologies in Manufacturing 6th-8th October 2005, Cluj-Napoca, Romania, pp.:1-8.
b./ Magyar nyelvű
1. Előszó, X. Nemzetközi Szerszámkonferencia, Miskolc, MAB Székház, 2000. szeptember 6-8., pp.: XI-XII., ISBN 963 661 434 2
2. Spiroid hatjások fejlesztési irányai, IX. Országos Gépész Találkozó, Kolozsvár, 2001. április 26-29., pp.: 90-93., (Társszerző: Dr. Bányai Károly)
3. Gyors prototípus előállítása LOM eljárással, Fiatal Műszakiak Tudományos Ülésszaka, Kolozsvár, 2002. március 22-23., pp.: 17-22., (Társszerzők: Dr. Gyenge Csaba, Dr. Petru Berce, Dr. Balc Nicole)
4. Köszörűkorong kopásának folyamatos felügyelete, Fiatal Műszakiak Tudományos Ülésszaka, Kolozsvár, 2002. március 22-23., pp.: 23-30., (Társszerzők: Szentesi Attila, Tóth Gábor)
5. Internetes lehetőségek szerszámfolyam tervezéséhez, Fiatal Műszakiak Tudományos Ülésszaka, Kolozsvár, 2002. március 22-23., pp.: 31-36., (Társszerzők: Dr. Szabó Sándor, Dr. Varga Gyula)
6. Kinematikai felületek előállításához szükséges szerszámprofilok meghatározása spline alkalmazásával, Fiatal Műszakiak Tudományos Ülésszaka, Kolozsvár, 2002. március 22-23., pp.: 37-40., (Társszerzők: Dr. Bányai Károly, dr. Balajti Zsuzsa)
7. A gépgyártás fejlesztésének tendenciái, X. Országos Gépész Találkozó, Székelyudvarhely, 2002. április 25-28., pp.: 24-29.
8. Szerszámprofilok meghatározása csavarfelületekhez, X. Országos Gépész Találkozó, Székelyudvarhely, 2002. április 25-28., pp.: 59-62. (Társszerző: Dr. Bányai Károly)
9. Modifikált spiroid hajtópárok kapcsolódásának vizsgálata, Dokotoranduszok Fóruma, Miskolc, 2004. november 9. pp.:15-20.
10. Környezetbarát megmunkáláshoz használt forgácsolószerszámok kopásának mérése CCD kamerával, (MEASUREMENT OF WEAR OF CUTTING TOOL – USED FOR ENVIROMENTALLY FRIENDLY MASHINING – BY CCD CAMERA), The 5th International Scientific Conference, Development of Metal Cutting DMC 2005, 12-13. 09. 2005., Kosice, Slovakia, ISBN 80-8073-303-1, EAN 9788080733032 pp.H26-H30. (Társszerző: Varga Gyula)
11. Térbeli hajtások hordképének elemzése, meghatározása. The 5th International Scientific Conference, Development of Metal Cutting DMC 2005, 12-13. 09. 2005., Kosice, Slovakia, ISBN 80-8073-303-1, EAN 9788080733032 pp.H31-H38. (Társszerző: Balajti Zsuzsa)
Konferencia előadások
I. Idegen nyelvű
a./ külföldön
1. Introduction about University of Miskolc, the Faculty of Mechanical Engienering, the Department of Production Engineering, Vendégprofesszori előadás, University of Illinois at Chicago; Chicago, Sept 15 – Dec. 15, 2001.
2. The Situation of the Development of Worm and Spiroid Gear Drives in Hungary, Vendégprofesszori előadás, University of Illinois at Chicago; Chicago, Sept 15 – Dec. 15, 2001.
3. The Basis of the General Mathematical Model is the Generation and Geometrical Definition of Cylindrical and Conical Worm Gear Drives, Together with the Design Model of Milling Cutters, Vendégprofesszori előadás, University of Illinois at Chicago; Chicago, Sept 15 – Dec. 15, 2001.
4. Intelligent Automation of Design and Manufacture of Worm Gear Drives, Vendégprofesszori előadás, University of Illinois at Chicago; Chicago, Sept 15 – Dec. 15, 2001.
5. A Kolozsvári Műszaki Egyetem vendégprofesszori előadásai német, angol nyelven:
§ Herstellung von Schraubenflächen im Automatischem System
§ Experimentelle Untersuchung des Bohrprozesses
§ Allgemeine Tendenzen der Entwicklung der Produktionstechnik
§ Manufacturing and Qualification of Drives With Good Efficiency and High Load Capacity
§ Gyártás- és szerszámgeomeria tervezésének módszere csavarfelület előállítááshoz
§ Hoch- und Spitzentechnologien der Fertigungstechnik – Entwicklungsstand und – Perspektiven
§ Zur Enstehung von Verzagnungsabweichungen Spanend Bearbeiteter Zylinderräder
§ Verfahren zur Weichbearbeitung von Zahnrädern
6. Fejlesztési irányzatok a gépgyártásban, Környezetkímélő gépipari technológiák. Minimálkenés – szárazmegmunkálás szimpozium, Kecskemét, 2002. április 5.
b./ itthon
1. Oktatás-módszertani és kutatási tapasztalatok a karbantartás-javítás oktatásának területén a Miskolci Egyetem Gépgyártástechnológiai Tanszékén, VIII. Karbantartást és Javítást Oktatók Konferenciája, Nyíregyháza, 2000. január 24-25.
2. A műanyagbevonatok alkalmazása a javítástechnológiában
VIII. Karbantartást és Javítást Oktatók Konferenciája, Nyíregyháza, 2000. január 24-25.
II. Magyar nyelvű
a./ külföldön
1. Környezetvédelem, környezetbarát technológiák, Műszaki Tudományos Ülésszak (Magyar Tudomány Napja), Kolozsvár, 2001. november 3.
2. Környezetvédelem, környezetbarát technológiák, Műszaki Tudományos Ülésszak (Magyar Tudomány Napja), Kolozsvár, 2001. november 3.
3. A Kolozsvári Műszaki Egyetem vendégprofesszori magyar nyelven:
§ Dudás I.: Gyártás- és szerszámgeometria tervezésének módszere csavarfelület előállításhoz
4. Gyors prototípus előállítása LOM eljárással, Fiatal Műszakiak Tudományos Ülésszaka, Kolozsvár, 2002. március 22-23., pp.: 17-22., (Társszerzők: Dr. Gyenge Csaba, Dr. Petru Berce, Dr. Balc Nicole)
5. Köszörűkorong kopásának folyamatos felügyelete, Fiatal Műszakiak Tudományos Ülésszaka, Kolozsvár, 2002. március 22-23., pp.: 23-30., (Társszerzők: Szentesi Attila, Tóth Gábor)
6. Internetes lehetőségek szerszámfolyam tervezéséhez, Scientific Session of Young Technical Expertises, Kolozsvár, Románia, 2002. március 22-23, pp.: 31-36, ISBN 973-8231-16-7 (Társszerzők: Szabó S., Varga Gy.)
7. Kinematikai felületek előállításához szükséges szerszámprofilok meghatározása spline alkalmazásával, Fiatal Műszakiak Tudományos Ülésszaka, Kolozsvár, 2002. március 22-23., pp.: 37-40., (Társszerzők: Dr. Bányai Károly, dr. Balajti Zsuzsa)
8. A gépgyártás fejlesztésének tendenciái, X. Országos Gépész Találkozó, Székelyudvarhely, 2002. április 25-28., pp.: 24-29.
9. Szerszámprofilok meghatározása csavarfelületekhez, X. Országos Gépész Találkozó, Székelyudvarhely, 2002. április 25-28., pp.: 59-62. (Társszerző: Dr. Bányai Károly)
10. Együttműködés a kolozsvári és a miskolci egyetemek között a gyors prototipizálás területén, International Scientific Conference, IXth FMTÜ, Kolozsvár, Románia, 2004. március 26-27, pp.:245-250, ISBN 973-8231-33-7 (Társszerzők: P. Berce, Cs. Gyenge, Gy. Varga)
11. Környezetkímélő forgácsolási folyamatok modellezése, 12th International Conference in Mechanical Engineering, OGÉT 2004, Csíksomlyó, Románia, 2004. április 22-25, pp.:65-70, ISBN 973-86097-9-8 (Társszerző: Gy. Varga)
12. Korszerű csigahajtások geometriai méretezése és végeselem analízise, 12th International Conference in Mechanical Engineering, OGÉT 2004, Csíksomlyó, Romania, 2004. április 22-25, pp.:65-70, ISBN 973-86097-9-8
13. Geometria modellek alkalmazása a Gyors-prototípus eljárásoknál, XI Nemzetközi Gépész Találkozó, Románia, Kolozsvár 2003. május 8-11., pp.:58-64 (Társszerzők: Felhő Csaba, Nagy Mátyás Krisztián, Tóth Gábor, Szentesi Attila)
14. Kétkamerás térbeli méréstechnika, IX. FMTÜ, Nemzetközi Tudományos Konferencia, Románia, Kolozsvár, 2003. március 21-22. pp.:1-8., (Társszerzők: Felhő Csaba, Szentesi Attila, Tóth Gábor), ISBN 973-8231-33-7
15. Spiroid hajtások geometriai méretezés és végeselemes analízise, IX. FMTÜ, Nemzetközi Tudományos Konferencia, Románia, Kolozsvár, 2004. március 26-27., pp.:112-118., (Társszerzők: Felhő Csaba, Dr. Bányai Károly), ISBN 973-8231-33-7
16. Ívelt profilú csiga geometriai méretezése és végeselemes analízise, IX. FMTÜ, Nemzetközi Tudományos Konferencia, Románia, Kolozsvár, 2004. március 26-27., pp.:191-197., (Társszerző: Tóth Gábor), ISBN 973-8231-33-7